To put air in tires, first find the recommended pressure for your tires, usually on a sticker inside the driver's door or in the vehicle's manual. Remove the valve cap on the tire, then attach an air pump nozzle firmly onto the valve stem. Inflate the tire in short bursts, checking the pressure frequently with a gauge until it reaches the recommended PSI. If you overinflate, release some air by pressing the center pin inside the valve. Finally, replace the valve cap to keep the valve clean and airtight. Here is a step-by-step summary:
- Find the recommended tire pressure from the vehicle sticker or manual.
- Remove the valve cap from the tire valve.
- Attach the air pump nozzle firmly onto the valve stem.
- Inflate the tire in short bursts, checking pressure often.
- Release air if overinflated by pressing the valve stem pin.
- Replace the valve cap once done.
It’s best to check tire pressure when the tires are cold (car has not been driven for at least 2 hours) for accurate results. Over- or under-inflated tires can lead to increased risk of tire damage or accidents.
